RONDA Carbon Filter for Vacuum Cleaner
Carbon filters are applied in renovation work when there is a risk that the building materials contain PCBs.
The RONDA Carbon Filter for Vacuum Cleaner is an in-line filter which is placed in the outlet hose of the vacuum cleaner. The construction of the filter gives the least possible resistance in the outlet air stream. In this way, the suction power of the vacuum cleaner is not noticeably reduced. It is important that the air that goes into the carbon filter has been correctly and completely cleaned of fine dust. Any remaining dust particles will damage the carbon and block the filter.
The carbon filter is constructed for max. 600 m3/h and can therefore be used in combination with all our RONDA H-S vacuum cleaners (RONDA 200H-S, 1800H-S, 2800H-S). But it can also be used with other vacuum cleaners as long as they are equipped with a separate exhaust outlet. The life span of the carbon filter depends on the use and the absorbed concentration. We recommend to test the filtering ability through regular measurements, or to exchange the filter periodically.
RONDA Carbon Filter for Vacuum Cleaner is fitted onto a handy trolley with 4 swivel castors and 2 lifting points for easy handling. The filter comes without connection hose which must be ordered separately. The inlet of the filter is equipped with a standard RONDA bayonet coupling – the same one as we use for our vacuum cleaners. The coupling can be sealed by means of a plug for transport or disposal. Bayonet couplings for various hose types are available – please contact us for further information.
- For filtering gases in the outlet air of a vacuum cleaner
- Easy and simple connection to the vacuum cleaner
- Handy trolley for easy transport.
Item number: 84.67.7040
Our products are sold worldwide through a network of professional resellers. Please submit the following information, and we will refer to a distributor in your area. You will hear from us within one working day.